Pressure Pump Units

Pressure Unit 441

Additional Info

  • Code 120-0461-PP441
  • Chassis Year 2007
  • Manufacturer Mack
  • Model CTP713
  • Condition Used
  • Engine Manufacturer Mack
  • Engine Model MP7-405M
  • Pump Gardner Denver TEE 4x5
  • Additional Information Tank Size: 1000 barrels
    Pick-up Pump Make: NOV
    Model: 640200226IT90
    Size: 4x3
$0.00
Quantity:

Trailer Mounted Twin Fluid Pump J537

Additional Info

  • Code 131-0658-TFP-J537
  • Operating Hours Each engine has 850 hrs
  • Condition Used
  • Engine Model 02x Detroit Diesel Engines, 60T Series.
  • Pump 02 Triplex Pumps, manufactured by MSI, new, 3 ½” plungers, max working pressure is 12,500 psi. Each pump can deliver 580 HP, tested.
    02 New Centrifugal pump 3” x 4”, manufactured by NOV
  • Additional Information 01 Displacement Tanks, 2 x 10 Barrels each compartment.
    Valves 2”x 2” and high-pressure pipe, figure 1502, new.
    Suction system, totally rebuilt in 4” pipe.

Pressure truck unit 1267

Additional Info

  • Code 120-0597-PT1267
  • Chassis Year 2008
  • Manufacturer Kenworth
  • Model T-800
  • Mileage (Km) 260,000 kms (161,556 miles)
  • Operating Hours 17,000 hrs
  • Condition Used
  • Pump 6000 psi
  • Additional Information - 11m3 advance tank.
    - 3x5 Gardner Denver triplex.
    - h2s gas scrubber mounted on the back.
    - New hoses

Pressure Unit 438

Additional Info

  • Code 120-0461-PP438
  • Chassis Year 2005
  • Model CV713
  • Condition Used
  • Engine Manufacturer Mack
  • Engine Model Mack AI-460 Engine
  • Number of Axles Tandem
  • Pump Triplex Pump: Gardner Denver
  • Additional Information Power: 460 HP at 1,950 RPM
    Meets EPA 2004 emissions standard
    Triplex Pump Maximum volume output: 5.8 bbl/min
    Triplex Pump Stroke: 5-in.
    Triplex Pump Plunger size: 4-in.
    Triplex Pump Maximum pressure: 5,125 psi
    Triplex Pump Maximum mainshaft speed: 300 RPM
    Triplex Pump Power: 165 BHP
    Mud Tank: 16 m³ (100 bbl) - two compartment mud tank.

Pressure Pump Truck 350

Additional Info

  • Code 120-0303-PT-350
  • Model CTP 344 triplex pump (4.5” x 5” plungers)
  • Number of Axles Single
  • Additional Information - Maximum pressure – 7,250 psi
    - Maximum volume – 366 gpm (1385 lpm)
    - 1502 discharge manifold
    - 1502 relief valve
    - 1502 plug valves
    - Pressure gauge (4 ½” face 0-10,000 psi)

    LOW PRESSURE PUMP
    - 4” T&E gear pump
    o Maximum pressure – 125 psi
    o Maximum volume – 1800 lpm
    o Maximum rpm – 750 rpm
    - 2 & 3” wafer valves (gear pump/tank return)
    - 4” wafer valves (tank suction)

    CRUDE/STORAGE TANK
    - Specification: TC-406 (DOT 406)
    - Capacity 12.1 m3
    - 2 compartments
    - Full opening hatch per compartment – 16 inch
    - Return line – 2 inch
    - Vent line – 2 inch
    - Load line rear – 2 inch
    - Placard mounts – dangerous goods
    - Internal dial gauges – stainless complete with labels

    DRIVE SYSTEM
    - Power divider (OMSI)
    - Gear drive
    - Driveshaft (truck transmission to power divider)
    - Driveshaft (power divider to rear axles)
    - Driveshaft (power divider to gear drive)
    - Chelsea PTO

    CONTROLS
    - ESD switch
    - Power divider valve
    - PTO selector
    - Air toggles for tank valve actuators
    - Work light switches

    HYDRAULICS
    - Hydraulic gear pump for the load/unload gear pump
    - Directional valve for gear pump
    - Hydraulic cooler
    - Hydraulic filters
    - Hydraulic tank.
$0.00
Quantity:

Pressure Pump Truck 75

Additional Info

  • Code 120-0303-PT-75
  • Manufacturer Gentex
  • Model W80 triplex pump (1.25” x 3” plungers)
  • Number of Axles Single
  • Additional Information HIGH-PRESSURE PUMP
    - Maximum pressure – 5,000 psi
    - Maximum volume – 23.9 gpm (90 lpm)
    - 1 ½” welded discharge manifold
    - 1” relief valve
    - 1 ½” ball valves
    - Pressure gauge (4 ½” face 0-6000 psi)

    LOW-PRESSURE PUMP
    - 3” Roper 3622 HBF gear pump
    o Maximum pressure – 125 psi
    o Maximum rpm – 750 rpm
    - 3” wafer valves (gear pump/triplex suction)
    - 4” wafer valves (tank suction)

    CRUDE/STORAGE TANK
    - Specification: TC-406 (DOT 406)
    - Capacity 6.7 m3
    - 2 compartments
    - Full opening hatch per compartment – 16 inch
    - Return line – 2 inch
    - Vent line – 2 inch
    - Load line rear – 2 inch
    - Placard mounts – dangerous goods
    - Internal dial gauges – stainless complete with labels

    DRIVE SYSTEM
    - Power divider (OMSI)
    - Belt drive
    - Driveshaft (truck transmission to power divider)
    - Driveshaft (power divider to rear axles)
    - Driveshaft (power divider to belt drive)
    - Chelsea PTO.
$0.00
Quantity:

Support Pressure Pumps 02

Additional Info

  • Code 131-0459-SPS 02
  • Manufacturer Aqua-Dyne Inc, 1989
  • Operating Hours Less than 100 hours
  • Engine Manufacturer Caterpillar
  • Engine Model D399 Marine Engine
  • Additional Information - Western Roughrider 1500 set up to run 200 US gpm at 15,000 psi
    - Driver & Pump is on an industrial skid that has a roof and side removable tarps for weather
    - Water cooled
    - 3,927 cubic inch, 1250hp, V16, 4-stroke-cycle diesel
    - Lightly used, rarely, if ever, at max load
    - Fuel/Air skid included
    - Sand blasted and painted recently
    - over $100,000 spent updating the control system
$0.00
Quantity:

Support Pressure Pumps 01

Additional Info

  • Code 131-0459-SPS 01
  • Manufacturer Aqua-Dyne Inc,1898
  • Operating Hours Less than 100 hours
  • Condition Used
  • Engine Manufacturer Caterpillar
  • Engine Model D399 Marine Engine
  • Additional Information - Western Roughrider 1500 set up to run 200 US gpm at 15,000 psi
    - Driver & Pump is on an industrial skid that has a roof and side removable tarps for weather
    - Water cooled
    - 3,927 cubic inch, 1250hp, V16, 4-stroke-cycle diesel
    - Lightly used, rarely, if ever, at max load
    - Fuel/Air skid included
    - Sand blasted and painted recently
    - over $100,000 spent updating the control system
$0.00
Quantity:

Subscribe

logo footer

 

 

9152 52nd street SE. Calgary, Alberta, AB T2C 5A9, Canada
Email:  info@flowlift.com
Phone:  +1 (403) 251-3808
Fax:  +1 (403) 251-3809