Coiled Tubing

Coiled Tubing Unit 06

Additional Info

  • Code 104-0001-CT 06
  • Chassis Year 2003
  • Manufacturer International
  • Model 5600i
  • Mileage (Km) 120,000 km
  • Condition Used
  • Engine Manufacturer Cummins
  • Engine Model ISX 500
  • Backend Year Built 2003
  • Injector Size 70,000 Lbs
  • Additional Information
    Compressor: 4 stage 660CFM
    Driven by transfer case from truck
    Coil drum is capable of holding 3800m of 1 1/4" coil
    Adjustable arch has tilt head and is capable of extending 27'
    Adjustable slant poles for directional wells
    Injector for coil is driven by 2 M11 motors (2 speed- low 60m/min, high 120m/min)
    capable of running 1" up to 1 1/2" coil
    Injector is capable of pulling approx 70,000 lbs
    Flow back tank capacity 60 barrels or 10 cubes
$0.00
Quantity:

Coil Tubing Unit 102

Additional Info

  • Code 104-0446-CT 102
  • Condition New
  • Injector Size 60,000 lb pull capacity and 30,000 lb snubbing capacity
  • Injector Head Motors HR - 660
  • Reel Capacity 16,000’ x 1 1⁄2” pipe
  • Additional Information Trailer Mounted Conventional Coil Tubing Unit:
    - The Coiled Tubing Unit consists of a Wet Kit, Control Cabin, Tubing Reel, HR-660 Injector and remote BOP control
    - 14.5’ high, 8.5’ wide, 52.5’ long

    Configuration and Features: - 16 Wheel (4 Axle) Peerless Trailer designed for use with tridem tractor
    - QSX15 driven power pack located on trailer gooseneck
    - 8.5’ x 8.5’ control cabin on a scissor lift
    - Kubota KS2000 Diesel powered 17kW Genset
    - Tubing Reel dims: 124” OD x 74” inside width x 86” core
    - 3 hydraulically operated hose reels (injector power, injector control and BOP control hoses)
    - Hydraulically operated injector tilt for HR-660 storage and deployment
    - Remote BOP suitcase w/ 75’ long control cable
$0.00
Quantity:

Coil Tubing Trailer 680

Additional Info

  • Code 104-0660-CT-680
  • Chassis Year 2010
  • Manufacturer Peterbilt
  • Condition Used
  • Engine Model P/B Cummins ISX 15.0L 500-HP Diesel Engine
  • Number of Axles Tri-Axle
  • Injector Make 2011 Hydra Rig 680 Injector
  • Additional Information 90" Tubing Guide, 12' X 71" Tubing Reel,
    13' X 8' Control Cab,
    (2) Hose Reels W/ Hydraulic Hose,
    Mtd On 2011 Peerless 8-1/2' X 50' 4-Axle Trailer W/ Air Ride Suspension,
    P/B Cummins ISX 15.0L 500-HP Diesel Engine, Eaton Trans, Eng Brake, DEF, DPF, Air Cab, PTO, 22,700#, Air Lift 3rd Axle, Dbl Frame, Chalmers RB Over WB Suspension, 244"WB, 150-Gal Fuel Tank,
    Hydra Rig Hyd Unit, Synchronous Generator P/B Kubota 4-Cyl Eng

Coil Tubing Trailer J503

Additional Info

  • Code 104-0658-CT-J503

Coil Tubing Trailer J153

Additional Info

  • Code 104-0658-CT-J153

Coiled Tubing Unit 28

Additional Info

  • Code 104-0524-CT-28
  • Chassis Year 2010
  • Manufacturer Kenworth
  • Model T800
  • Number of Axles Tandem Triple
  • Additional Information Injector Model RT-25
    -Tubing size capability of ¾” to 2”
    -50,000 lb pull; 20,000 lb push
    -Hydraulic push and pull weights
    -80-2 internal roller chains
    -24” long hardened and reversible skate chains
    -60” radius guide arch
    -Electronic counter wheel mounted in arch
    -Magnetic pick-up on counter wheel
    -Side door stripper base
    -Four - 3” bore skate cylinders
    -Progressive 5,000 psi side door stripper
    -5 ½” BOEN union connection

    Reel Model CP1140
    Capacities:
    -3000 meters - 2” tubing
    -3600 meters – 1 ¾ ” tubing
    -4500 meters – 1 ½ “ tubing
    -Two air pot style reel brakes

    Hydraulic Pumps and Drives
    -HPV 135 controls the injector
    -HPV 105 controls auxiliary
    -200-gallon hydraulic oil tank.
$0.00
Quantity:

Coiled Tubing Unit 27

Additional Info

  • Code 104-0524-CT-27
  • Chassis Year 2010
  • Manufacturer Kenworth
  • Model T800
  • Number of Axles Tandem Triple
  • Additional Information Injector Model RT-25
    -Tubing size capability of ¾” to 2”
    -50,000 lb pull; 20,000 lb push
    -Hydraulic push and pull weights
    -80-2 internal roller chains
    -24” long hardened and reversible skate chains
    -60” radius guide arch
    -Electronic counter wheel mounted in arch
    -Magnetic pick-up on counter wheel
    -Side door stripper base
    -Four - 3” bore skate cylinders
    -Progressive 5,000 psi side door stripper
    -5 ½” BOEN union connection

    Reel Model CP1140
    Capacities:
    -3000 meters - 2” tubing
    -3600 meters – 1 ¾ ” tubing
    -4500 meters – 1 ½ “ tubing
    -Two air pot style reel brakes

    Hydraulic Pumps and Drives
    -HPV 135 controls the injector
    -HPV 105 controls auxiliary
    -200-gallon hydraulic oil tank.
$0.00
Quantity:

Hybrid Coil Tubing 01

Additional Info

  • Code 104-0326-CTH 01
  • Backend Year Built 2007
  • Backend Make CT 100
  • Injector Size 85,000 lb (35,000 daN)
  • Additional Information Coil: 2-7/8" (73mm)
    Drillpipe: 3-½" (89mm)
    Depth Rating: 4,900 ft (1,500m)
    Top Drive / Hook Load Rating: 100,000 lb (44,500 daN) (AC Drive)
    Injector Rating: 85,000 lb (35,000 daN)
    Rig Power: 2 x Gensets 900 kW / 1,200 Hp (CAT 3456)
    Mud Pumps: GD PZ9 / 860 kW / 1150 Hp
    Mud Volume: 250 bbl (40 m3)
    Footprint: 195 ft x 57 ft (60m x 17m)
    Height: 17' with injector retreated
    Width: 12' 6"
    Loads: 10
$0.00
Quantity:

Coiled Tubing Unit 601

Additional Info

  • Code 104-0397-CT 601
  • Chassis Year 2007
  • Manufacturer Kenworth Single Steer Tri Axle
  • Model T800
  • Mileage (Km) 133,967 Kms
  • Operating Hours 9,641 Hrs
  • Condition Used
  • Engine Manufacturer Caterpillar
  • Engine Model C15
  • Number of Axles Tri-Axle
  • Backend Year Built 2007
  • Backend Make Celtic Pride
  • Injector Make Celtic Pride
  • Injector Size 19.1mm - 50.8mm
  • Injector Head Motors MSE 11
  • Picker/Tilting Arch Picker
  • Picker/Tilting Arch Make Amco Veba
  • Picker Capacity 8800LBS Load
  • Reel Capacity 1800 meters of 44.5mm ECoil
  • Fluid Pump Giant
  • Fluid Pump Output 60 Litres/ min
  • Fluid Pump Maximum Pressure 5000 PSI
  • Surfactant Holding Tank Capacity 1000 Litres
  • Additional Information Tubing Injector Pull/Snub Capacity: 40,000LBS - 20,000LBS
    Tubing Injector Dual Speed
    Hydraulic Tilting Tubing Injector
$0.00
Quantity:

Coiled Tubing Unit 401

Additional Info

  • Code 104-0397-CT 401
  • Chassis Year 2007
  • Manufacturer Kenworth Tandem Tridrive
  • Model T800
  • Mileage (Km) 145,424 km
  • Operating Hours 11,539
  • Condition Used
  • Engine Manufacturer Caterpillar
  • Engine Model C15
  • Number of Axles Tandem Triple
  • Backend Year Built 2007
  • Backend Make Celtic Pride
  • Injector Make Celtic Pride
  • Injector Size 19.1mm - 50.8mm
  • Injector Head Motors Proclaine MS11
  • Picker/Tilting Arch Picker
  • Picker/Tilting Arch Make Amco Veba
  • Picker Capacity 8800LBS Load
  • Reel Capacity 4800 Metres
  • Fluid Pump Giant
  • Fluid Pump Output 60 Litres/ min
  • Fluid Pump Maximum Pressure 5000 PSI
  • Surfactant Holding Tank Capacity 1000 Litres
  • Additional Information Tubing Injector Pull/Snub Capacity: 40,000LBS - 20,000LBS
    Tubing Injector Dual Speed
    Hydraulic Tilting Tubing Injector
$0.00
Quantity:

Coiled Tubing Unit 301

Additional Info

  • Code 104-0397-CT 301
  • Chassis Year 2006
  • Manufacturer Western Star Tandem Tridrive
  • Model 4900
  • Mileage (Km) 212,180 Kms
  • Operating Hours 11,400
  • Condition Used
  • Engine Manufacturer Caterpillar
  • Engine Model US Twin Turbo
  • Number of Axles Tandem Triple
  • Backend Year Built 2006
  • Backend Make C-Tech Manufacturing
  • Injector Make C-Tech Manufacturing
  • Injector Size 19.1mm - 50.8mm
  • Injector Head Motors Proclaine MSE 11
  • Picker/Tilting Arch Picker
  • Picker/Tilting Arch Make Fassi F150
  • Picker Capacity 12,000LBS Load
  • Reel Capacity 2300 meters of 1.5” CT
    Instrumentation unit
    Houses wood spools
    No need for spooling trailer
  • Additional Information Tubing Injector Dual Speed
    Hydraulic Tilting Tubing Injector
    No Operator Control Panel Cover.
$0.00
Quantity:

Coiled Tubing Unit 201

Additional Info

  • Code 104-0397-CT 201
  • Chassis Year 2007
  • Manufacturer Kenworth Tandem Tridrive
  • Model T800
  • Mileage (Km) 254,449 km
  • Operating Hours 19,000
  • Condition Used
  • Engine Manufacturer Caterpillar
  • Engine Model C15 Twin Turbo
  • Backend Year Built 2007
  • Backend Make Celtic Pride
  • Injector Make Celtic Pride
  • Injector Size 19.1mm - 50.8mm
  • Injector Head Motors Proclaine MS11
  • Picker/Tilting Arch Picker
  • Picker/Tilting Arch Make Amco Veba
  • Picker Capacity 8800LBS Load
  • Reel Capacity 4800 Metres
  • Fluid Pump Giant
  • Fluid Pump Output 60 Litres/ min
  • Fluid Pump Maximum Pressure 5000 PSI
  • Surfactant Holding Tank Capacity 1000 Litres
  • Additional Information No Operator Control Cab
$0.00
Quantity:

Subscribe

logo footer

 

 

9152 52nd street SE. Calgary, Alberta,
AB T2C 5A9, Canada

Email:  info@flowlift.com
Phone:  +1 (403) 251-3808
Fax:  +1 (403) 251-3809