Fullbore Spinner

The Fullbore Flowmeter combine with our Temperature tool will allow you to run a production profile. The FBFM has a three arm spring loaded cage to center the impellers in multiple casing sizes so you only have to buy one tool. The blades design allow the impeller to work on small production rate wells do to the use of low friction bearings and the large cross sectional area. The tool is supplied with ancillary items that allow you to run in all casing sizes from 4-1/2” to 9-5/8”.

Features:

  • Injection and production flow profiling
  • Leak detection
  • Low or hi flow rates

 

Specifications

Temperature rating

1770C (3500F)

Pressure rating

103.4 MPa (15,000 psi)
Tool Diameter 43mm (1-11/16”)

Length

1064mm (41.92”) (Electronics + Fullbore)

Weight

3.6kg (8lb)

Casing range

4-1/2” to 9-5/8”

Flow output

10 pulses/revs (directional)

Threshold

<0.5m/min (<1.6ft/min)

Max fluid velocity

90Bpd

Material

Sour Service

Connector

go-connector (single pin)

Flow measure point

414mm (16.3”)

 

 

Subscribe

logo footer

 

 

9152 52nd street SE. Calgary, Alberta, AB T2C 5A9, Canada
Email:  info@flowlift.com
Phone:  +1 (403) 251-3808
Fax:  +1 (403) 251-3809

 

Please publish modules in offcanvas position.